Feature

• Compact design
• Any adjustments are not required
• High repeatability
• Relay output type is lined-up

Specifications

* IP66 type(filling up silicone) is lined-up, too.

External dimension

Caution items

* Don't make a parallel wiring with high-voltage and power line. It may cause a malfunction because of induction.

* Don't detect transparent object such as glass etc.

* Don't use at the places where water splashes or vapor exists. Don't use at the places where over rated temperature, humidity or impact exists.

Output circuit

FB-10C

Operating mode changeover(Pink)
1. Output transistor ON when light-entering(connected to +V side)
2. Output transistor ON when light-interruption(connected to 0V side)

Connection

FB-10C

FB-10M

Features

F series in common

Specifications

External dimension

Caution items

* Don't make a parallel wiring with high-voltage and power line. It may cause a malfunction because of induction.

* Don't detect transparent object such as glass etc. Don't use at the places where temperature variation or vapor exists.

* If it would detect the glossy object such as metal plate etc., it may be affected by disturbance light such as sun light. In case that, install the cover for shading or paint the object in black

Output circuit

FB-7N

FB-7M

Connection

FB-7N

FB-7M

FBX-25	Amplifier built-in type U-shaped photo sensor
2-Beam type	2-Beam type lined-Up! Distance between projector and receiver 25mm and Repeatability 0.1mm!

Feature

• Protective structure IP67
• Any adjustments are not required
• Fast response time and high repeatability
• In conformity with EMS directive
• Common use for Dark-ON/Light-ON

Application

1-beam type(Stop position)	*2-beam type(Slow-down position/stop position)

Specifications

Kind	Through-beam type
Model No.	FBX-25JC	FBX-25JA	FBX-25DC	FBX-25DA
Power source	12 to 24VDC（＋10％, -10％, Ripple 5% or less）
Current consumption	20mA or less	25mA or less	35mA or less	40mA or less
Light source	Infra-red LED（880nm）
Distance between projector and receiver	25mm(1-beam)		25mm(2-beam)
Detectable objects	Opaque object with φ1mm or more
Operating mode	Changeover by control wire(FBX-25JC/25JA : Pink, FBX-25DC/25DA : Pink or Purple) Light-ON : Connected to +V side(Brown), Dark-ON : Connected to 0V side(Blue)
Control output	NPN	PNP	NPN	PNP
	Allowable load voltage : 33V or less, Allowable load current : 100mA or less, Residual(ON) voltage : 1.0V/100mA or less, 0.5V/10mA or less
Response time	1msec or less
Repeatability	±0.1mm
Indicators	Power lamp : Green LED(Lights up when power-ON), Light-entering lamp : Orange LED(Lights up when light-entering)
Connection	Cable type(2m long, 0.2mm2, 4-core vinyl cable with oil-proof and cold-proof )		Cable type(2m long, 0.2mm2, 6-core vinyl cable with oil-proof and cold-proof cable)
Ambient illuminance	Sun light : 10,000lx or less, Incandescent lamp : 5,000lx or less
Ambient temperature/humidity	-25 degrees C to ＋55 degrees C（-30 to 70 degrees C when stored）, 45 to 85％RH(Not icing)
Vibration resistance	Double amplitude 1.5mm, 10 to 55Hz, Each 2 hour in X, Y and Z directions
Impact resistance	500ｍ/s2, Each 3 time in X, Y and Z directions
Protective structure	IP67(IEC standard)
Case material	Polycarbonate
Weight	Approx. 60g		Approx. 65g

External dimension

Output circuit

NPN output type		PNP output type
Operating mode changeover (Pink, but pink/purple in case of 2-beam type) 1. Output transistor ON when light-entering(connected to +V side) 2. Output transistor ON when light-interruption(connected to 0V side) * Provided to 2-beam type only

Connection

* Provided to 2-beam type only

Feature

• Compact design
• Any adjustments are not required
• Fast response time and high repeatability

Specifications

* IP65 type(filling up silicone) is lined-up, too.

External dimension

Caution items

* Don't make a parallel wiring with high-voltage and power line. It may cause a malfunction because of induction.

* Short-circuit protective circuit is not provided. Don't connect power source or capacity load directly.

* Don't detect transparent object such as glass etc.

* Don't use at the places where water splashes or vapor exists. Don't use at the places where over rated temperature, humidity or impact exists.

Output circuit

Operating mode changeover(Pink)
1. Output transistor ON when light-entering(connected to +V side)
2. Output transistor ON when light-interruption(connected to 0V side)

Connection

FG-31C/51C	Amplifier built-in type U-shaped photo sensor
FG-31C FG-51C	Die-casting case is applied! Sensing distance is 30mm and 50mm!

Feature

• Die-casting case is applied! Sensing distance is 30mm and 50mm!
• Any adjustments are not required
• High repeatability
• Relay output type is lined-up

Specifications

*1 PNP output type is lined-up, too.
*2 IP66 type(filling up silicone) is lined-up, too.

External dimension

FG-31C

FG-51C

Caution items

* Don't make parallel wiring with power line etc. because of avoiding surge or induction if cable would extend.

* Make sure to wipe the lens surface with soft clothes etc. because it may cause malfunction.

* Don't detect registered marking or transparent objects.

* If it would detect the glossy object such as metal plate etc., it may be affected by disturbance light such as sun light. In case that, install the cover for shading or paint the object in black

Output circuit

1. In case of Light-ON operation
2. In case of Dark-ON operation

Connection

Control output(1) : In case of Light-ON operation
Control output(2) : In case of Dark-ON operation